Towertalk
[Top] [All Lists]

[Towertalk] 402CD coil mods

To: <towertalk@contesting.com>
Subject: [Towertalk] 402CD coil mods
From: n3rr@erols.com (Bill Hider (N3RR))
Date: Fri, 20 Sep 2002 13:34:44 -0400
I also used the large heat-shrink with the built-in glue and replaced the
entire old heat-shrink.
Bill, N3RR

----- Original Message -----
From: "K9AJ" <mcgirr@interaccess.com>
To: <towertalk@contesting.com>
Sent: Friday, September 20, 2002 12:03 PM
Subject: [Towertalk] 402CD coil mods


> Hello All,
>
> I wonder if those who have modified the loading coil assembly on the
> CushCraft 402CD (replace the existing screws that attach to the coil  w/
> stainless steel bolts & locking nuts) can tell me what material they used
> to re-seal the loading coil assembly?  If shrink tubing, what size (the
> aluminum tubing the coil is mounted on is 5/8")?  Would high quality
> electrical tape work?  Any thoughts regarding this mod?
>
> Thanks,
>
> Mike/K9AJ
>
> _______________________________________________
> Self Supporting Towers, Wireless Weather Stations, see web site:
http://www.mscomputer.com
> Call 888-333-9041 to place your order, mention you saw this ad and take an
additional 5 percent off
> any weather station price.
> _______________________________________________
> Towertalk mailing list
> Towertalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>



<Prev in Thread] Current Thread [Next in Thread>