Towertalk
[Top] [All Lists]

[Towertalk] Mast Coupler?

To: <towertalk@contesting.com>
Subject: [Towertalk] Mast Coupler?
From: Mark <AA6DX@pacbell.net> (Mark)
Date: Fri, 27 Sep 2002 13:53:05 -0700
The problem here is that this is like holding a broom by its last 3 inches,
in a vertical position, and DOING something with it... sure, you can do that
.. but not for VERY LONG ... and  Jim has it right .. in this instance, a
killer-diller gin pole is not needed .. just some assistance, and steadying
factor... like, a heavy duty piece of conduit clamped to the tower legs at
the top, and a pulley up "yonder" --  so you can navigate while holding on
for dear life!  IMHO .. 73, Mark  6dx  (Been there, done that)
----- Original Message -----
From: "Jim White, K4OJ" <k4oj@tampabay.rr.com>
To: <sparks@apk.net>
Cc: <towertalk@contesting.com>
Sent: Friday, September 27, 2002 1:01 PM
Subject: Re: [Towertalk] Mast Coupler?


> if you are using two pieces spliced why bother with the extension...
> typically a splice is synonymous with failure point, eh?
>
> Suspect you want to have about half of it in the tower and half of it
> out of the tower - better to use a 16 footer and borrow a gin pole in my
> opinion...
>
> You can fabricate a gin pole for this application if need be - be sure
> to make it tall enough that you can elevate the middle to half the masts
> length above the top of the tower - otherwise you will need
> counterweights, etc. - and significantly will increase the "pucker
> factor"  (that is a direct quote from the list moderator re this type of
> work)
>
> K4OJ
> >



<Prev in Thread] Current Thread [Next in Thread>