Hi Ken, I took a number 6 stranded and ran it from the tower base which is
grounded to 3 ground rods (one in the bottom of the hole) to the mast pipe
so I don't have to rely on the tower being grounded through the slides. I
clamped the number 6 to my cable stand offs then taped the rotor cable and
feed lines to the number 6. That way I didn't crush the rotor cable or feed
lines in the process. Seems to work well. I made a large loop at the rotor
so the Ham-m doesn't have to grunt to hard. 73 Larry WA9VRH
----- Original Message -----
From: <n2smt@optonline.net>
To: <towertalk@contesting.com>
Sent: Tuesday, September 23, 2003 1:24 PM
Subject: [TowerTalk] HDX-555 Grounding
> I'm looking for suggestions on whether or not to develop some sort of
mechanical ground connection between the tower's top two sections. I intend
on grounding the coax at the top and bottom of the tower a interm solution
and just wondered if anyone has developed something to accomplish this.
>
> 73, de Ken, N2SMT
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|