Ham Radio Outlet ( http://www.hamradio.com/ ) sells Polyphaser products.
>From the front web page pick Polyphaser from the "Select by Manufacturer"
search, and you will get a complete listing of items.
73 George W5VU
----- Original Message -----
From: "Didier Juges" <didier@cox.net>
To: <towertalk@contesting.com>
Sent: Tuesday, March 23, 2004 3:15 PM
Subject: [TowerTalk] Re: Protecting Steppir control cable
> Polyphaser sells a rotor cable protector for 8 wire rotor cable. That may
> work well for the Steppir (you may need more than one). It is rated 24VAC.
>
> That raises a question: where do you buy the Polyphaser stuff from? They
do
> not have a list of distributors on the web site, and they don't seem to
> sell direct either.
>
> 73,
> Didier KO4BB
>
> At 09:21 AM 3/23/2004 -0800, you wrote:
> >At 11:16 AM 3/23/2004 -0500, Bill Ogden wrote:
> >
> >>People seem pleased with their SteppIR antennas. These comments have
been
> >>intermixed with the discussion about lightning protection. This leads
me
> >>to ask about lightning and the SteppIRs. The antenna contains
electronics
> >>on each element and there are 12 wires to the antenna (plus the coax).
How
> >>sensitive are these to lightning? Should the wires (plus the rotator
wires
> >>plus any other relay wires) all be run through a "lightning" protector
> >>before entering the house?
> >
> >
> >I can't speak to the sensitivity (or not) of the SteppIR stuff up on the
> >mast: I suspect that a direct hit would kill it. What electronics are
> >actually up there? If it's just a stepper motor, they're it's pretty
tough.
> >
> >I can say that you should definitely run all the wires through some form
of
> >transient protection. There are low voltage terminal blocks (much like
> >those used for telephone wiring) that would be suitable. For instance,
my
> >house has a pair of 4 pair (i.e. 8 wires) protection/demarcation points
> >(telco installed) for the incoming telephone lines. When connecting up a
> >weather station (mfr by Davis) at a facility in New Mexico, we used a
> >similar device (sold by, but probably not actually manufactured by,
> >Davis). Likewise, we used protection devices on a pole mounted video
> >camera on a Pelco pan/tilt mount.
> >
> >Probably, your goal is to keep the stuff inside from getting killed, not
> >necessarily to protect what's on the tower.
> >
> >Jim, W6RMK
>
>
> _______________________________________________
>
> See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|