Towertalk
[Top] [All Lists]

RE: [TowerTalk] Re: [Antennas] inline female coax connector?

To: "TowerTalk" <towertalk@contesting.com>
Subject: RE: [TowerTalk] Re: [Antennas] inline female coax connector?
From: "Keith Dutson" <kjdutson@earthlink.net>
Reply-to: keith@dutson.net
Date: Wed, 13 Oct 2004 11:19:57 -0500
List-post: <mailto:towertalk@contesting.com>
What is the insertion loss below 400 MHz?  Number in dB please.

Keith NM5G

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Jack Painter
Sent: Wednesday, October 13, 2004 8:53 AM
To: FireBrick; TowerTalk List; Antenna List
Subject: [TowerTalk] Re: [Antennas] inline female coax connector?


> Reading the info on the various coax types.
> Keep seeing the references to barrel connectors.
>
> Is there a female coax connector?
> I'm only familiar with chassis mount female connectors.
> I'm asking about a female that would mate to a pl259.
>
> Bill H. in Chicagoland

Bill, the barrel connectors are double-ended SO-239 females, intended for
use as a union between two PL-259 male coax lines. Use them for temporary or
emergency patchwork, because the insertion loss in these connectors is high.

Jack
Virginia Beach

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any
questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>