Towertalk
[Top] [All Lists]

Re: [TowerTalk] Re: [Antennas] inline female coax connector?

To: Jack Painter <223bthp@cox.net>
Subject: Re: [TowerTalk] Re: [Antennas] inline female coax connector?
From: Don Havlicek <n8de@thepoint.net>
Reply-to: n8de@thepoint.net
Date: Wed, 13 Oct 2004 11:34:03 -0500
List-post: <mailto:towertalk@contesting.com>
Actually ... if properly installed, the insertion loss for the 'barrel connector' is less than .5 db ... that has been addressed here before.
Don
N8DE


Jack Painter wrote:
Reading the info on the various coax types.
Keep seeing the references to barrel connectors.

Is there a female coax connector?
I'm only familiar with chassis mount female connectors.
I'm asking about a female that would mate to a pl259.

Bill H. in Chicagoland


Bill, the barrel connectors are double-ended SO-239 females, intended for
use as a union between two PL-259 male coax lines. Use them for temporary or
emergency patchwork, because the insertion loss in these connectors is high.

Jack
Virginia Beach

_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk



_______________________________________________

See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>