That's how mine is mounted......MUCH easier. :-) Been doing it that way
for decades......
73,
Joe
WDØM
At 02:18 PM 10/25/2004, ChetMoore wrote:
I'm with Doug. Rotor change out is so much easier this way.
73
Chet N6ZO
> My experience differs...properly sized thrust bearing side screws ARE used
> to support the weight of the mast and antennas at my QTH. I have not had
> any adverse reactions from using this method and it certainly simplifies
> the process when having to change out a rotor. Care must be taken when
> using the words "never" and "always".
>
> Doug
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|