Re: [TowerTalk] Tower Conundrum

["Alan NV8A (ex. AB2OS)" <nv8a@att.net>]

See:

http://www.trylon.com/lightdutytowers/selfsupporttwrs_pricing.asp

This gets you a page where you can select the desired height and base 
dimensions. This also includes the following:

"Notes: C/w anchor stub legs for concrete. Splice hardware, and an 8' x 
1.9" O.D. antenna mounting pipe.

To support the mounting pipe, every Top section is factory-installed 
with angle frames and u-bolts at top and middle of the section.

Tower height shown is nominal. Actual tower height achieved utilizing 
support pipe provided with tower."

Note the last paragraph.

Alan NV8A


On 01/14/05 12:05 pm Dave NØRQ tossed the following ingredients into the 
ever-growing pot of cybersoup:

> I won't argue with the specs or bang for the buck, but I don't understand
> the statement about Trylon and "8 ft. pipe".  Maybe they've changed
> something, but my Trylon did not have any "pipe" -- just 8  8-foot
> sections, along with the 3 leg base (stubs) that go in the concrete.
> My T600-64' is 64' tall -- or at least 62', accounting for overlap
> where the sections join.
>
> If I had it to do over again, I would be giving both Trylon an ANW
> a serious look...

_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk