Towertalk
[Top] [All Lists]

Re: [TowerTalk] Foundation for a tower -- cost

To: <towertalk@contesting.com>
Subject: Re: [TowerTalk] Foundation for a tower -- cost
From: "John & Peggy" <bankhein@frontiernet.net>
Date: Fri, 27 May 2005 17:53:00 -0500
List-post: <mailto:towertalk@contesting.com>
Another easy method is using a composite metal-cutting blade on a table saw,
and setting the blade up to a third of the thickness of the rebar.  Simply
lay the rebar out and slowly feed/ roll the bar until it's whittled down -
then snap it.  Goes quickly, but wear protective glasses and a shirt you
don't mind getting coated with iron dust.  If you don't set the blade up too
high, there's very little chance of it getting enough bite to kick back.
I've used this many times to make dozens of deadmen for anchoring landscape
timbers.

John K0JJH


> > Building your own Rebar cage is easy and could save you a few bucks.
> You just need a saw and some tie wire.
--------


_______________________________________________

See: http://www.mscomputer.com  for "Self Supporting Towers", "Wireless Weather 
Stations", and lot's more.  Call Toll Free, 1-800-333-9041 with any questions 
and ask for Sherman, W2FLA.

_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>