As Jerry said, soak them with penetrating oil. Have patience. Give it a
good soaking, every couple of hours, and test carefully. If they do not
come loose easily, let set overnight. They teach this in small engine
repair. I've seen pistons bound so tight you couldn't move them with a
heavy hammer. Pour enough WD40 or other penetrating oil on top so it'll run
down the sides of the piston, let set overnight and you can take it out by
hand the next day.
Roger Halstead (K8RI and ARRL 40 year Life Member)
N833R - World's oldest Debonair CD-2
www.rogerhalstead.com
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|