Don't know why you can't get it to work OM. I've got a 3 E 40m beam
built that way and it works great...maybe your antenna is installed over
a iron ore deposite???
73,
dave
wa3gin
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of D. Scott
MacKenzie
Sent: Saturday, November 19, 2005 12:45 PM
To: WA3GIN in Alex. City, VA; 'A.J. Farmer (AJ3U)'; 'Travis Fitzgerald -
VE3WO'
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] 80m dipole question
If the dropping works well, then why can't I select and appropriate
length,
and feed one side or the other, and create an array of sorts....
Similar to a Half "U" or Lazy H?
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of WA3GIN in Alex.
City, VA
Sent: Saturday, November 19, 2005 12:37 PM
To: 'A.J. Farmer (AJ3U)'; 'Travis Fitzgerald - VE3WO'
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] 80m dipole question
That dropping concept in reality works fine. Most of the radiating work
is done much closer to the feed point, the first 1/8 wave of wire either
side of the feed point.
73,
dave
wa3gin
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of A.J. Farmer
(AJ3U)
Sent: Saturday, November 19, 2005 12:14 PM
To: Travis Fitzgerald - VE3WO
Cc: towertalk@contesting.com
Subject: Re: [TowerTalk] 80m dipole question
The "flattened V" is okay. It does not have to be perfectly
horizontal all the way across. Mine does the same thing with a droop
of about 6 to 10 feet in the center and it works fine. I have even
heard some recommend this type of droop.
The other thing you could consider is to attach your insulators to the
dipole a little further in towards the center and let the end slack
droop down vertically like this:
-------x--------
| |
Good luck in the contest!!
--
A.J. Farmer, AJ3U
http://www.aj3u.com
On 11/19/05, Travis Fitzgerald - VE3WO <ve3wo@rac.ca> wrote:
> Anyone on the reflector this morning? I'm having a small problem with
an 80m dipole that I'm raising for CQWW next weekend. Total length of
the dipole is 133', but distance from tower to house is about 125'
(didn't know I was short until I tried to raise it). If I raise the
dipole until it reaches the house, the dipole resembles a flattened "V",
with the feedpoint at about 25'. Tower end is at 60', house end at 35'.
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
any questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
any
questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless
Weather Stations", and lot's more. Call Toll Free, 1-800-333-9041 with
any questions and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
See: http://www.mscomputer.com for "Self Supporting Towers", "Wireless Weather
Stations", and lot's more. Call Toll Free, 1-800-333-9041 with any questions
and ask for Sherman, W2FLA.
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|