[TowerTalk] Source of 6/8 pin connectors?

Towertalk

[TowerTalk] Source of 6/8 pin connectors?

To:	<towertalk@contesting.com>
Subject:	[TowerTalk] Source of 6/8 pin connectors?
From:	"Jim McDonald" <jim@n7us.net>
Date:	Tue, 21 Nov 2006 14:13:42 -0600
List-post:	<mailto:towertalk@contesting.com>

Does anyone have any suggested sources for Cinch-Jones (or whatever) plug
and socket sets for rotor control or whatever?  I'm thinking 6 or 8 pins.
Part numbers would be helpful.   I looked at Mouser but am not sure of
manufacturer/part.  Thanks.

 

Jim N7US 

 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
[TowerTalk] Source of 6/8 pin connectors?, Jim McDonald <= Re: [TowerTalk] Source of 6/8 pin connectors?, Brad Pioveson W9FX [TowerTalk] Real waterproof connectors for rotators (was: source of6/8 pin connectors?), Richard (Rick) Karlquist Re: [TowerTalk] Real waterproof connectors for rotators (was:source of6/8 pin connectors?), K8RI on TowerTalk Re: [TowerTalk] Real waterproof connectors for rotators (was:source of 6/8 pin connectors?), Jim Lux Re: [TowerTalk] Real waterproof connectors for rotators (was:source of 6/8 pin connectors?), Daron J. Wilson Re: [TowerTalk] Real waterproof connectors for rotators (was:source of 6/8 pin connectors?), AA6DX - Mark Re: [TowerTalk] Real waterproof connectors for rotators (was:source of 6/8 pin connectors?), Rick Karlquist Re: [TowerTalk] Source of 6/8 pin connectors?, AA6DX - Mark Re: [TowerTalk] Source of 6/8 pin connectors?, donovanf Re: [TowerTalk] Source of 6/8 pin connectors?, Peter Dougherty

Previous by Date:	[TowerTalk] mast weight on the rotor or thrust bearing?, Phil Camera
Next by Date:	Re: [TowerTalk] aluminum radials was Re: Copper wire prices, Donald Chester
Previous by Thread:	[TowerTalk] mast weight on the rotor or thrust bearing?, Phil Camera
Next by Thread:	Re: [TowerTalk] Source of 6/8 pin connectors?, Brad Pioveson W9FX
Indexes:	[Date] [Thread] [Top] [All Lists]