I used torque arms on my Rohn 45 to get the Phillystran a bit farther away
from the tower and out of harms way of tools, etc. as I'm climbing or
working on an antenna just above a guy point. I've certainly read all of
the controversy about whether or not torque arms actually work as intended.
If they do help, that is great. If they don't, I still feel better about
the protection they might help to provide to the Phillystran .
73,
Ron AD7L
----- Original Message -----
From: "Dick Green WC1M" <wc1m@msn.com>
To: "'Keith Dutson'" <kdutson@sbcglobal.net>; <towertalk@contesting.com>
Sent: Wednesday, December 20, 2006 9:25 PM
Subject: Re: [TowerTalk] Phillystran Guy Design
> > > What is the purpose of the EHS at the tower point?
>
> As Roger said, some people put it there to provide protection against
> falling tools, etc. I debated doing it on my tower and decided against it.
> First, the Phyllistran guy grip is about three feet long and provides some
> protection in the most likely path for falling tools, etc. Second, the
three
> SteppIRs in my stack will sit just above the guys and I don't want any
> interaction. Tough to pick a short length that won't interact with an
> antenna that covers 20m-6m.
>
> 73, Dick WC1M
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|