Towertalk
[Top] [All Lists]

Re: [TowerTalk] Taking up slack in wire antennas

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Taking up slack in wire antennas
From: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
Reply-to: Ian White GM3SEK <gm3sek@ifwtech.co.uk>
Date: Fri, 18 May 2007 23:07:01 +0100
List-post: <mailto:towertalk@contesting.com>
w4ZW wrote:
>
>I've used bungee cord for some time.  I put in a loose  length of 
>"Spectra" or "Deema" in the link that is my safety net if the bungee 
>breaks.  You can double up the lengths/sizes and get whatever tension 
>you want.  I've found the good sailing black bungee works pretty well. 
>Be sure and sear the ends so they don't start unraveling.  I wrap my 
>ends  with sailing tape as well.
>
Several years ago, we had a brainstorming session on this problem for my 
'In Practice' column.

There were various suggestions involving weights, dual-diameter drums 
etc. The wackiest idea was to have the tensioning weights disappear down 
into a matched pair of ornamental wishing wells!

But the idea that actually worked was the loooong bungee cords.


-- 

73 from Ian GM3SEK         'In Practice' columnist for RadCom (RSGB)
http://www.ifwtech.co.uk/g3sek
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>