Towertalk
[Top] [All Lists]

Re: [TowerTalk] AB Chance anchor installation... How!?!

To: R Atkins <rusty_atkins@yahoo.com>, towertalk@contesting.com
Subject: Re: [TowerTalk] AB Chance anchor installation... How!?!
From: Larry DiGioia N8KU <towertalk@longwire.com>
Date: Tue, 17 Jul 2007 21:34:27 -0400
List-post: <mailto:towertalk@contesting.com>
Funny you should ask - I just did it (had it done) this past weekend.

I should point out that not everyone will have the resource that I did - 
a friend, who is a ham, and an electrical lineman. He borrowed one of 
their pole-setting trucks, came, and using what is actually a cross 
between a drill and a crane, installed all 3 anchors in about an hour. 
For good measure, he also drilled the beginning of the base hole with 
the 18" auger, all I have to do is "square it."

Specs for my 120' Rohn 45 tower say that I would need something like 6" 
anchors, but he "likes the big ones a lot better," so in went (3) 14" 
diameter anchors. Not even a hint of a problem, they cut through my dry 
Ohio clay (almost closer to rock than dirt) like a knife through butter. 
I could hear rocks being pulverized as they went in. And yes, they were 
AB Chance anchors, I guess this utility company knows their stuff.

Plan "B" would have been to have my neighbor use his mini-track-hoe to 
dig down 6', dig a slot to lay them at an angle, then just lay the 
anchors in there and cover with a 1/2 yard or so of concrete. I am just 
glad the truck was able to squeeze into my back yard and do it the way 
they were designed for.

R Atkins wrote:
> First off, let me thank all of you for the responses these past few days 
> about all facets of tower installation as well as a few bits and pieces I've 
> needed to get the job done. Its amazing how responsive and helpful this 
> list/"reflector" is. I've been so busy installing the tower that I haven't 
> had time to touch the computer, but all your help is VERY much appreciated.
>
>
> Now,.. for the question.
>
> How in the world do you install those 8" diameter (model 816?) screw-in 
> ground anchors?!?!?!
>
> We've bent a 6' long pipe  and a 8' long pipe so badly that we could hardly 
> remove them... and these anchors are only halfway in.
>
> There are limitations to what we can because of a heavily tree lot that we 
> want to keep that way (so... we can't get a tractor in there).
>
> How do you get these things screwed all the way into the ground?
>
> Thanks!
>
>
>
>
>
>
>
>
>        
> ____________________________________________________________________________________
> Got a little couch potato? 
> Check out fun summer activities for kids.
> http://search.yahoo.com/search?fr=oni_on_mail&p=summer+activities+for+kids&cs=bz
>  
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>   

-- 
Larry  N8KU

 l o n g w i r e . c o m
 HF - DX - CW - Digital

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>