Towertalk
[Top] [All Lists]

Re: [TowerTalk] Bamboo Quad Spreaders

To: "WA3GIN" <wa3gin@comcast.net>, <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] Bamboo Quad Spreaders
From: "Richard HIll" <rehill@ix.netcom.com>
Date: Wed, 26 Dec 2007 16:09:05 -0800
List-post: <mailto:towertalk@contesting.com>
You may want to check the web for articles on building bamboo fly rods such
as: http://globalflyfisher.com/rodbuilding/bamboo1/index.php

Fly rod makers are concerned about strength and flexibility.  Their
techniques may be useful re spreader strength and longevity.

Rich
NU6T

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com]On Behalf Of WA3GIN
Sent: Wednesday, December 26, 2007 3:58 PM
To: TOWERTALK@contesting.com
Subject: [TowerTalk] Bamboo Quad Spreaders


Hi Folks,

Santa brought me a dozen 40ft bamboo stalks freshly cut and ready for drying
and UV sealing treatment.

I'm looking for suggestions regarding the sealing paint/varnish material
used.

In the past 920 years ago) I used marine spar varnish which was mixed for
100% outdoors use...much has changed in the paint/varnish industry since
then.  I have no idea what works today.

I tried polyurethane on one element and it flaked away in a few years of
exposure to the sun.

I'm also open to speader color ideas. I know from experience that people who
paint their front doors black experience severe wood spliting, apparently
from the excessive heat build-up when the doors are exposed to sunshine, so
I think black is not a good color but what about silver, white, sky blue?

Thoughts are welcome,
dave
wa3gin
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>