Towertalk
[Top] [All Lists]

Re: [TowerTalk] RFI Identification

To: Tony <dxdx@optonline.net>
Subject: Re: [TowerTalk] RFI Identification
From: WD0M <WD0M@centurytel.net>
Date: Mon, 21 Jan 2008 16:20:17 -0700
List-post: <mailto:towertalk@contesting.com>
Live in the country?  Neighbors put up an electric fence?  Same thing 
happens here in horsey country.  I can null it out by aiming the beam 
away from it 90 degrees.  Late some night, I'm off to visit the 
source....and fix it.  ;-)

Joe Hannigan - WDØM
Pagosa Springs, CO

http://www.WD0M.com
http://www.pagosarocks.com
http://www.quiltqueen.net




Tony wrote:
> All,
>
> I have an RFI problem that I'm trying to identify. It's a continuous 
> pulse noise that pops on every 1/2 second. The actual timing between 
> each pulse is about 0.533 seconds and doesn't seem to change.
>
> It's spread accross all HF bands and on some days, it creeps up into the 
> 100MHz range. It's stronger on the lower bands (80 meters) than on the 
> upper HF frequencies.
>
> The signal is directional and can be nulled completely when not beaming 
> in the direction of the source. The interference came on suddenly in 
> December.
>
> I have a few recordings and would appreciate any suggestions. Apologies 
> for the off-topic subject -- please reply direct.
>
> Tony -K2MO 
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
>   
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>