Towertalk
[Top] [All Lists]

Re: [TowerTalk] Advice on Tower

To: towertalk@contesting.com, w4lde@numail.org
Subject: Re: [TowerTalk] Advice on Tower
From: K7LXC@aol.com
Date: Sun, 22 Jun 2008 22:15:19 EDT
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
 
In a message dated 6/22/2008 9:01:56 A.M. Pacific Daylight Time,  
towertalk-request@contesting.com writes:

>  Although no specific restrictions on height or style are  place on me by 
the HOA or the deed modifications,  when I started the  process
I thought a US Tower MARB-550 would look very neighbor friendly and  be 
easy to get buy in's by all.

>  I already have a base  for the tower in-place but I am a little concerned 
as to the ratings for  the MARB when comparing a TX-455 style.

>  My Counties wind  rating is 70MPH, we have already seen 50MPH gusts 
during a thunderstorm  recently.



Well, it doesn't even become a wind until it  hits 70 MPH, which is the 
minimum rating in the US, so you don't have any  serious wind problems. 
 
>  The tower is rated at 9 sq/ft at 70 MPH and 61#'s weight, the  specified 
wind load by SteppIR is 8.1 sq/ft. at 58#'s  I would elect  to use the 
rotating n base thus keeping the rotor at the bottom of the  tower and 
reducing the extra weight and little load.

>  Now  the questions?

>  1.  Since I am almost right on top of  the spec's, wind load and weight, 
should I abandon this Tower  selection.
 
    Just because your close to its limits? Just be  conservative, keep your 
homeowner's insurance paid up and enjoy it. 
 
    Or not. Maybe the psychological effect isn't  worth bearing. I'll never 
discourage anyone from over-engineering their  installation. 

>    a. As it now stands I have a 3'-6" x 3'- 6" x  6" concrete base with 
rebar and mounting bolts per the US tower  spec's

>  2.  Is there a way to adapt any type of   rotating guy device to this 
type of tower?


No. It's not designed for one. Any guy tension  will come out as additional 
load on the tower cables - a BIG possibly fatal  negative. 

>  3.  I would also like to hear from SteppIR - US Tower  users with similar 
setups.
 
    SteppIRs work great no matter what they're  mounted on. 

>  Maybe I can improve on the ratings by not  keeping the Tower raised to 
the maximum height unless I am chasing some DX  expedition or am I dreaming?




You're not  dreaming. Tower capacity increases with reduced height. That's 
the  main way of being conservative.
 
Cheers,
Steve     K7LXC
TOWER TECH 
TOWER TECH 



**************Gas prices getting you down? Search AOL Autos for 
fuel-efficient used cars.      
(http://autos.aol.com/used?ncid=aolaut00050000000007)
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>