Towertalk
[Top] [All Lists]

Re: [TowerTalk] Killer Springs; Spring-Eq plate/Leeson

To: <aa6eg@k6bj.org>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Killer Springs; Spring-Eq plate/Leeson
From: "Mark Robinson" <markrob@mindspring.com>
Date: Sun, 26 Oct 2008 09:57:03 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
The Hillman Imp used a rubber doughnut drive shaft coupler that would be 
excellent for this purpose, especially for larger arrays. Unfortunately that 
car has been out of production for a long time now. I believe that the 
couplings used on early Lotus Elans would be worth a look as well


http://www.hillmanimpspecialists.com/pricelist19.htm

http://www.boatdesign.net/forums/jet-drives/dateline-bikini-shaft-coupling-15676.html




Mark N1UK G3ZZM




----- Original Message ----- 
From: "Pat Barthelow" <aa6eg@hotmail.com>
To: <towertalk@contesting.com>
Sent: Sunday, 26 October, 2008 9:22 AM
Subject: [TowerTalk] Killer Springs; Spring-Eq plate/Leeson


>
> Dave Leeson, W6NL designed a great solution to the rotor-to- Beam shock 
> absorber problem, using a rubber BMW steering shaft  coupler....But that, 
> as you say, was a different cart of apples than the Killer spring-guy wire 
> idea.
>
> I have Leeson's Masterpiece, "Physical Design of Yagi Antennas" (covering 
> a lot on towers, also) in storage, somwhwere, and miss thumbing through it 
> once in a while.  A real gem.  It should be a reference in the Bookshelf 
> of any Tower owner/user.
>
> Manufacturers ought to  incorporate mention of same, so that Leeson's 
> great idea can  meet the high standards of Steve's prime directive.
>
>
>
>
> All the best,   Pat Barthelow   AA6EG    Skype:  sparky599aa6eg@k6bj.org
>
> http://www.jamesburgdish.org
>
>
>> From: wa3gin@comcast.net
>> To: K7LXC@aol.com; towertalk@contesting.com; draxfelton@gmail.com
>> Date: Sun, 26 Oct 2008 08:24:48 -0400
>> Subject: Re: [TowerTalk] Spring between equalizer plate and earth anchor
>>
>> I remember some folks using springs like this in their rotor to mast
>> connection ala Back Lash....maybe somewhere down the line the story was
>> mis-understood and the coils migrated to guy cables -- scary!
>>
>> 73,
>> dave
>> wa3gin
> ----- Original Message ----- 
> From: <K7LXC@aol.com>
> To: <towertalk@contesting.com>; <draxfelton@gmail.com>
> Sent: Sunday, October 26, 2008 7:43 AM
> Subject: Re: [TowerTalk] Spring between equalizer plate and earth anchor
> In a message dated 10/25/2008 9:26:45 P.M. Pacific Daylight Time,
> towertalk-request@contesting.com writes:
> A local ham told me to get some heavy duty hood springs from  a
> 1950-1960's car and put them between my guy wire equalizer plates and 
> earth anchors.
> This is to "prevent backlash" during storm  force winds.
> Any thoughts on this?
>
> You bet. This is a particularly stupid idea. Is  there anything like
> this that's even suggested by the manufacturer? No way.
>
> By backlash, I assume he's talking about slack  in the guys. If the guys
> are  properly tensioned, there's no need to "prevent  backlash" because 
> there
> is no slack on the guys.
>
> And besides, you've got no idea what the strength  of the hood springs
> are. How would you attach them?
> In all things the LXC Prime Directive still  trumps amateur old wives'
> tales: "DO what the manufacturer says." The converse  is also true "DON'T
> DO  what they don't tell you."  And congratulations for checking on 
> TowerTalk  before following this
> very poor - and potentially fatal - advice.
>
> Cheers,
> Steve    K7LXC
> TOWER TECH
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>