Towertalk
[Top] [All Lists]

Re: [TowerTalk] Was "43ft Vertical Feeding

To: "'jimlux'" <jimlux@earthlink.net>
Subject: Re: [TowerTalk] Was "43ft Vertical Feeding
From: "David Jordan" <wa3gin@comcast.net>
Date: Tue, 25 Nov 2008 10:06:13 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
The high voltage appears at the tip of the vertical, where the corona ball
goes. I believe the feedpoint is the high current portion of the antenna
where most of the radiation starts...

-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of jimlux
Sent: Tuesday, November 25, 2008 9:53 AM
To: WA3GIN
Cc: towertalk@contesting.com; Samir Popaja; Richards
Subject: Re: [TowerTalk] Was "43ft Vertical Feeding

WA3GIN wrote:
> Why not just purchase two 5 or 8 port automatic antenna relays.  Stick
your 
> LC network for each band in-between the ports.  One coax input, five
outputs 
> to LC networks, five outputs from LC networks to one output to bast of 
> antenna. It all fits in an outdoor inclosure (surface mounted or use the 
> bury type often used for sprinkler cut-off valves).
> 
> 73,
> dave
> wa3gin
> -
Sure.. 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>