Towertalk
[Top] [All Lists]

Re: [TowerTalk] coax entry

To: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Subject: Re: [TowerTalk] coax entry
From: "Norm Duxbury" <duxburyn@bellsouth.net>
Reply-to: "Tower and HF antenna construction topics." <towertalk@contesting.com>
Date: Wed, 20 Jan 2010 15:12:55 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Do what your local electrical code specifies.  Not doing so puts you in an 
awkward position with respect to your insurer should you suffer a direct hit 
and there is damage to claim.

73, Norm - W1MO

----- Original Message ----- 
From: <kb2m@arrl.net>
To: <towertalk@contesting.com>
Sent: Wednesday, January 20, 2010 08:59
Subject: [TowerTalk] coax entry


> I'm building a new home that will have a full basement. I'm going to move 
> my
> shack into the basement and I'm looking for any ideas on how to bring in 
> all
> my antenna cable's. I have about 12 antennas total. Cable's will consist 
> of
> mostly RG-8, but two of the cables are hardline, one 1/2 inch, the other
> 5/8. The new house will be about 20 feet away from my tower.
>
> I was thinking of mounting  a grounded plate to the tower, and then attach
> all of the cables. I would also mount lightning suppressers at that
> location. I would then  run short 20 foot cables into the shack via a 
> buried
> conduit. What should I use for the conduit? Does mounting (and grounding)
> all the antennas to the Tower make sense, or should I do this just outside
> the house? Any and all input appreciated.
>
>
>
>
>
> 73 Jeff kb2m
>
>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>