Shopping for new connectors for my new antenna project, I am finding that
there are a lot of different connectors to choose from. Even if one settles
on (1) Amphenol (2) silver plated (3) Teflon connectors, I am having
difficulty understanding which are the best ones, and which are knockoffs.
The connectors from Amphenol sold through Mouser are stamped with part
number 83-822. They are packaged individually in plastic bags labeled
Amphenol Corporation RF Division/ Danbury Connecticut. Assembled in Mexico.
I have purchased PL-259s at a recent Hamfest from a dealer previously
thought to be reputable, packaged individually in plastic bags marked
"Amphenol/Connex". The number 182120 is stamped on each bag. There is no
identifier on each of the conectors. They feel to the hand to be slightly
lighter in weight and have subtly different markings.
I have a batch of PL-259s that are engraved with the part number
83-isp-1050. They look identical to those from Mouser, except they are not
as bright, and, I suspect, are not silver plated, but feel quite rugged.
Having spent too much money on the tower, antenna and cable, I would prefer
that my signal not go up in smoke in a bad connector. Anyone make sense of
these?
Thanks, Fred, K3BHX
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|