Towertalk
[Top] [All Lists]

Re: [TowerTalk] HDX-555 relay settings

To: "Doug Rehman" <doug@k4ac.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] HDX-555 relay settings
From: "Ed Magnuson" <w1mag@bellatlantic.net>
Date: Mon, 30 Aug 2010 16:15:09 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Thanks, Doug. I will set them both the same and for about 2 seconds and see 
if that works.  My tower is at our country place, which we visit on 
week-ends so will check it out then. This problem follows my tilting the 
tower to the ground to paint the four Steppir fiberglass tubes; now upright, 
the motor does not start. So relays may not be the problem but last time the 
tower would not crank up, replacing a relay was the remedy. We shall see.

And thanks for giving this tower dummy an idea of what the relays do. Hi.

Ed W1MAG 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>