Thanks, Hector. I'll install those end caps now.
73, Joe
On 11/8/2010 12:34 PM, Hector Garcia XE2K wrote:
> Joe
>
> The clamps used in the 1200 are the 3/16 and the end caps are required to
> keep
> the water out of the kevlar, water damage the kevlar
>
>
> I have several hundreds of feets of that and several dozens of terminal kits
> and no failure, maybe you overtightened the clamps
>
>
>
> J.Hector Garcia XE2K / AD6D
> Mexicali B.C DM22fp
> P.O.Box 73
> El Centro CA 92244-0073
> http://xe2k.net
> http://dxxe.org
>
>
>
>
>
>
> ________________________________
> From: "Joe Giacobello, K2XX"<k2xx@swva.net>
> To: Towertalk@contesting.com
> Sent: Mon, November 8, 2010 9:21:09 AM
> Subject: [TowerTalk] Phillystran Questions
>
> I had never used Phillystran before, but am currently using the light
> duty grade (1200 lb. tensile) for stabilizing a long aluminum tubing
> stinger atop an aluminum tower.
>
> Based on recommendations from the supplier and info from this forum, I
> used 1/8" (or 3/16"?) cable clamps to secure the ends of the
> Phillystran. They had been in place for about a month when I undid one
> set to make some adjustments to the guy. I noticed that the clamps had
> compressed or made deep cuts in the the Phillystran so that it appeared
> that its strength was probably compromised. When I reclamped the
> adjusted cable, I didn't tighten the clamps to the same degree as I had
> originally because of my concern for cutting into the cable. I'm
> wondering whether these cuts are normal and don't seriously reduce the
> strength of the installation or not? Should I have used a torque wrench
> or similar to tighten the clamps?
>
> Also, end caps were supplied for the cable. Are these merely decorative
> or do they serve some other function?
>
> I'd appreciate any info that the forum can provide.
>
>
> 73, Joe
> K2XX
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|