Hello Tom!
There are 4 bolts on the Rohn TB-3 that attach it to the top tower plate.
The galvanized bolts are 0.500" in diameter - the nuts are 0.750" and the
bolt head is 0.875". They are 1.5" long. The as drilled holes in the bearing
mount are 0.59375" in diameter.
The three horizontal bolts that secure the mast are 0.375" diameter.
73,
Tim K3LR
-----Original Message-----
From: towertalk-bounces@contesting.com
[mailto:towertalk-bounces@contesting.com] On Behalf Of Georgens, Tom
Sent: Friday, August 12, 2011 10:35 AM
To: towertalk@contesting.com
Subject: [TowerTalk] TB3 Bolts
Hello
Does anybody know the size of the bolts that connect a TB3 thrust
bearing to the top of the tower.
Thanks for your help
73, Tom W2SC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|