Towertalk
[Top] [All Lists]

Re: [TowerTalk] Inverted vee mounted above HF Yagi

To: Jack White <m5pro@hotmail.com>
Subject: Re: [TowerTalk] Inverted vee mounted above HF Yagi
From: "Richard (Rick) Karlquist" <richard@karlquist.com>
Date: Wed, 17 Aug 2011 15:22:19 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
The inverted vee is likely to significantly distort the
pattern and/or SWR of the Yagi.  Are you sure you want
to do this?

Rick N6RK

On 8/17/2011 12:31 PM, Jack White wrote:
>
> Hi Guys
>
> I have a standard 60ft Versatower with a Yaesu G-1000 and bearing mounted at 
> the top, and just above this I have a Cushcraft A3WS (pic on QRZ). I want to 
> extend the stub mast about 20ft above the A3WS to support the centre of a 
> 160/80/40 trapped inverted vee. I'm looking for some type of mount that will 
> allow me to mount the centre of the inverted vee at the top of the stub mast 
> and remain fixed whilst the stub mast rotates. Ideas/advice would be great.
>
>
> 73, Jack G8DX
>
>
>                                       
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>