I push #14 electrical wire though while I'm gluing the sections together and
use that to pull the permanent wires once it's buried. The glue on the end of
the wire has not been an issue.
John KK9A
To: <towertalk@contesting.com>
Subject: [TowerTalk] Pull Rope in Conduits?
From: "Steve Jones" <n6sj@earthlink.net>
Date: Mon, 24 Oct 2011 08:51:04 -0700
I'm about to place a number of 150' Sched 40 PVC conduits between my shack
and new tower. I want to end up with small 200 lb. stength nylon twine in
each conduit, then use that small twine to pull through a larger 1/4" nylon
rope for the actual cable pulls.
Should I use a fish tape to pull through the small twine as I glue on each
additional section of conduit? I'm concerned about the PVC cement sticking
to the nylon twine. Or is there an easy way to install the small twine
after a whole 150' run of conduit is completely glued together?
73,
Steve
N6SJ
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|