[Top] [All Lists]

Re: [TowerTalk] 1/4 wave sloper attachment

To: <>, "Towertalk reflector" <>
Subject: Re: [TowerTalk] 1/4 wave sloper attachment
From: "Dave Hachadorian" <>
Reply-to: Dave Hachadorian <>
Date: Sun, 1 Jan 2012 14:19:35 -0700
List-post: <">>
>I need to replace the attachment for my 160/80 meter 1/4 wave
>sloper (fed at the same
>point, attached to one leg of the tower). I'm currently using an
>Alpha-Delta sloper
>connector, but it's in bad shape after 19 years. Suggestions?

I use a Budwig HQ-1 Dipole Center Insulator:

The sloping wire is connected to one side.  On the tower side, I
used a short piece of coax braid, and secured it to the tower by
wrapping it around a leg, and then clamping it with a stainless
steel hose clamp.

Dave Hachadorian, K6LL
Yuma, AZ 


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>