Before you take it down from the tower you might want to try a new capacitor
in the control box. A weak capacitor could be the problem of the motor not
always wanting to start, not enough torque.
73
Gary K4FMX
> -----Original Message-----
> From: towertalk-bounces@contesting.com [mailto:towertalk-
> bounces@contesting.com] On Behalf Of Bob K6UJ
> Sent: Sunday, April 01, 2012 8:33 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] TailTwister overhaul
>
> My HyGain Tailtwister has been in the tower for 18 years now and it is
> showing some signs of
> needing a little TLC. Sometimes when I try to rotate the beam it wont
> move at all, but if I turn it the opposite direction for a wee bit,
> then go back in the original direction, it works fine. I am planning on
> taking her down and doing an overhaul. I have been searching
> the archives and found a referral to this webpage for an overview of how
> to do the overhaul
> http://www.hayseed.net/~jpk5lad/Rotors/Tail-Twister.htm I am going
> to order new bearings, races, potentiometer, and what ever else
> that I can find that could be replaced. I'd like it to hold up for
> another 18 years, hihi. I understand that the parts are available from
> MFJ now.
> If you have overhauled a HyGain rotor and can throw me some words of
> advice it would be appreciated. Never overhauled a rotor
> before but it looks to be not that difficult.
>
> tnx
> Bob
> K6UJ
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|