Towertalk
[Top] [All Lists]

Re: [TowerTalk] Long UHF Bulkhead Connectors

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Long UHF Bulkhead Connectors
From: Rich WA1TRY <WA1TRY@cox.net>
Reply-to: wa1try@cox.net
Date: Mon, 09 Apr 2012 22:54:48 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Try this page over at Quicksilver Radio Products.

About half way down the page he has buikhead SO-239 starting at 2 inches 
up to 12 inches long.  Plus heavy duty washers and nuts if needed.

http://qsradio.com/Connectors.htm

73, Rich WA1TRY

On 4/9/2012 10:52 AM, John Becker wrote:
> There has been discussion recently about the quality of UHF connectors
> from manufacturers other than Amphenol. The consensus has been that they
> should be avoided.
>
> I'm replacing some feedlines, and was considering using UHF bulkhead
> connectors to bring them through the wall. Presently, they just go
> through with no connector. The problem is that AFAIK Amphenol only makes
> a 2" long UHF bulkhead connector and I would need 6".
>
> These are readily available, but the manufacturer seems to be unknown.
> For instance, I've seen them at Dayton from this dealer:
>
> http://www.transeltech.com/index.php?main_page=product_info&cPath=4_19&products_id=151
>
> Any thoughts on this subject? Thanks!
>
> 73,
>
> John, K9MM
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>