Towertalk
[Top] [All Lists]

Re: [TowerTalk] Aluminum Towers

To: towertalk@contesting.com
Subject: Re: [TowerTalk] Aluminum Towers
From: Alan NV8A <nv8a@charter.net>
Date: Thu, 09 Aug 2012 21:42:10 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
My impression is that the 21.06sf is the wind loading of the tower itself.

73

Alan NV8A


On 08/09/12 07:02 pm, KR7X wrote:
> Jerry:
>
> Where on the current Universal Tower web site did you find the 21sf at
> 110mph rating for the HD-21-50 rating? All they say there is if your antenna
> is xx SF go down the list that has the same number or larger than the
> antenna area I see no reference to wind velocity or what standard is used in
> their rating of tower capacity. Am I missing something?
>
> Regards
>
> Lonberg Design Group, Ltd.
> H. S. Lonberg, P.E.,S.E.
> Principal
>
>
> -----Original Message-----
> From: towertalk-bounces@contesting.com
> [mailto:towertalk-bounces@contesting.com] On Behalf Of jerry@hagrid.xm23.net
> Sent: Thursday, August 09, 2012 10:55 AM
> To: towertalk@contesting.com
> Subject: [TowerTalk] Aluminum Towers
>
> I plan to install a 50' tower and a tri-bander for 20/15/10 and was
> originally considering a U.S. Towers 55' crank-up model. While researching
> towers, I came across a company called Universal Towers that sells aluminum
> free-standing towers.
>
> Based on the specs, the Universal Towers HD-21-50 aluminum tower looks like
> it might be a better fit for the following reasons:
>
> * At $1989 it's $2K cheaper than the U.S. Tower crank-up
> * It only weighs 190 pounds (spread over five 10' sections), versus>800 for
> the crank-up, making it a lot easier to get off the truck with fewer people
> * The base doesn't require a rebar cage, making installation simpler
> * It won't rust
>
> The HD-21-50 is rated at 21 sq.ft. at 110 MPH, while the U.S. Tower crank-up
> is rated at 30 sq.ft. at 50 MPH.
>
> The installation instructions for the aluminum tower says to assemble the
> tower on the ground, attach the antenna(s), and then walk it up. In my case,
> I don't have 50' of horizontal space to do this. Is it feasible to climb
> this type of tower and assemble it vertically section-by-section with a gin
> pole? (Whatever I put up will be installed by a professional tower
> installer.)
>
> Any reason why I shouldn't consider this aluminum free-standing tower?
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>