On 02/09/2013 07:34 PM, Jeff Blaine wrote:
Static bleed is not an issue here, sort of. The antenna is grounded
through the antenna switch which has a 50 ohm load on the line when
it's not selected (unless that's been zapped). And when the line is
selected, it's run through a W3NQN type filter so it's got a pair of
coils running to ground on the shack side.
In lieu of the RFC, I could use some high-value resistors at the
feedpoint.
If it's single band, a shorted, 1/4 wave stub, grounded ?
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|