But given current distribution on a dipole, isn't it generally
understood that drooping ends have relatively little effect? I guess
the Moxon is a special case, where the ends are brought close to each other.
73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.
On 3/20/2013 7:27 AM, David Robbins wrote:
yes, in a classic yagi with straight and parallel elements that is true... but
when you bend or make the driven element not a simple half wave dipole then it
can have an effect on the pattern by itself.
Mar 20, 2013 01:18:45 AM, jim@audiosystemsgroup.com wrote:
On 3/19/2013 11:10 AM, Joe Subich, W4TV wrote:
They give the designer additional degrees of freedom with which to
control input impedance and side lobe structure.
I was with you until you said "side lobe structure." I don't claim to
know much a bout the design of Yagis, but I'm under the impression that
pattern is largely determined by the tuning and spacing of parasitic
elements. Am I wrong?
73, Jim K9YC
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|