Towertalk
[Top] [All Lists]

Re: [TowerTalk] Rohn 45AG4 guy tabs?

To: "Jim W7RY" <w7ry@centurytel.net>, <TOWERTALK@contesting.com>
Subject: Re: [TowerTalk] Rohn 45AG4 guy tabs?
From: <john@kk9a.com>
Date: Sat, 17 Aug 2013 18:22:19 -0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I rarely use a tram line. If I did I would not set it up 6 feet above the 
tower and I am sure that the one remaining guy that I suggested would 
adequately offset the tram line force.

John KK9A

----- Original Message ----- 
From: "Jim W7RY" <w7ry@centurytel.net>
To: <john@kk9a.com>; <TOWERTALK@contesting.com>
Sent: Saturday, August 17, 2013 17:56
Subject: Re: [TowerTalk] Rohn 45AG4 guy tabs?


That would be my last choice. Especially when you have a tram line attached
6 feet above the top of the tower stretching 100+ feet out.

73
Jim W7RY


-----Original Message----- 
From: john@kk9a.com
Sent: Saturday, August 17, 2013 9:53 AM
To: TOWERTALK@contesting.com
Subject: Re: [TowerTalk] Rohn 45AG4 guy tabs?

It's not a problem at all if you just drop two of the top guys when
installing the antenna.

John KK9A


To:"Mark Robinson" <markrob@mindspring.com>, "Jay Kesterson"
<k0gu@verinet.com>
Subject:Re: [TowerTalk] Rohn 45AG4 guy tabs?
From:"Jim W7RY" <w7ry@centurytel.net>
Reply-to:Jim W7RY <w7ry@centurytel.net>
Date:Fri, 16 Aug 2013 17:11:20 -0700

I agree. Having the guys on the top plate is a real pain. My first Rohn 25
was like that. It was very frustrating installing a beam with a tram system.
Install a guy ring 4-5 feet down the tower.
73
Jim W7RY



-----Original Message----- From: Mark Robinson
Sent: Friday, August 16, 2013 1:59 PM
To: Jay Kesterson
Cc: TowerTalk@contesting.com
Subject: Re: [TowerTalk] Rohn 45AG4 guy tabs?

Yes I believe that they can be used to secure the guys. I chose not to do
this since it is already cluttered up there and having the guys attached to
the top plate makes working on the antennas more difficult.

The angled down guy anchor points on the top plate made a good point to
secure the coax loop though.

I mounted my top guys several feet below the top plate.

73 Mark N1UK

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>