Why not use EZNEC or similar program to model the dipole at 8' straight
across and then at the 65'apex with whatever the height of the ends are?
This should give you a good idea of what to expect.
You should be able to determine how to cut the dipole while it is at 8' so
that it will be close to what you want when you raise the apex.
----------------- Wes Attaway (N5WA) -------------------
1138 Waters Edge Circle, Shreveport, LA 71106
318-797-4972 (Office) - 318-393-3289 (Cell)
Computer Consulting and Forensics
-------------- EnCase Certified Examiner ---------------
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of
john@kk9a.com
Sent: Wednesday, September 04, 2013 7:35 PM
To: TOWERTALK@contesting.com
Subject: Re: [TowerTalk] Cutting a dipole
The resonant frequency and the impedance will go up if it remained a
straight dipole. Tuning it at 8 feet high is a waste of time.
John KK9A
To:<towertalk@contesting.com>
Subject:[TowerTalk] Cutting a dipole
From:"James Setzler" <jms_k1sd@verizon.net>
Date:Wed, 04 Sep 2013 18:32:38 -0400
List-post:<towertalk@contesting.com">mailto:towertalk@contesting.com>
Greetings
I should know this but I've not made too many dipoles.
While it is hanging at 8 feet so I can get to it, I've cut a 40 m dipole to
the frequency I want. When I raise the apex to 65 feet as an inverted V,
how will the resonance frequency change?
73 James K1SD
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|