Date: Thu, 22 Oct 2015 20:58:16 -0700
From: Jim Brown <jim@audiosystemsgroup.com>
To: towertalk@contesting.com
Subject: Re: [TowerTalk] LPFM STL
On Thu,10/22/2015 6:42 AM, Paul Christensen wrote:
> I am looking into a high power Wi-Fi solution to get our remote site off DSL.
Don't rule out analog audio and RF for the link -- an Ethernet and/or
WiFi link adds latency.
73, Jim K9YC
## What has latency got to do with it ? Its not ham gear with tx /rx.
Its just a low power FM TX. The usual STL link, like FM broadcasters use,
typ used low power analog FM for the uhf STL. WI-FI would probably work just
fine, even if it did have some latency. Most AM /FM broadcast stations delay
the audio feed by 7-10 seconds anyway..before it even gets into the input of
any
STL link. In steves case, it’s a moot point.
Jim VE7RF
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|