Towertalk
[Top] [All Lists]

[TowerTalk] Elevated guys post...

To: <towertalk@contesting.com>
Subject: [TowerTalk] Elevated guys post...
From: "Douglas Ruz \(CO8DM\)" <co8dm@frcuba.co.cu>
Date: Mon, 28 Dec 2015 22:37:32 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Hi,

I have been reading few old messages on the list about elevated guys post.

I found an interesting table in one of the messages...most used materials are 
"I" beams and 6" pipe.

I decide install the 50 ft tower in the backyard and I need add one 10 ft high 
guy post...the other 2 guy anchors are at that level.

I will dig a hole, about 3 ft deep and will put the first tower section. One 
of my five tower section´s has problem on one leg on the bottom side and 
will put it in that hole and will add concrete.

I have a question:

Instead of 6" Pipe or "I" beam, is it possible use HD rail used in the rail 
line or railway as a guy post??.

Thanks,

73....Douglas, CO8DM
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>