Towertalk
[Top] [All Lists]

Re: [TowerTalk] copper or galvanized ground rods in red SC clay

To: towertalk@contesting.com
Subject: Re: [TowerTalk] copper or galvanized ground rods in red SC clay
From: jimlux <jimlux@earthlink.net>
Date: Sun, 10 Jan 2016 09:46:29 -0800
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 1/9/16 10:47 AM, Kelly Taylor wrote:
Here's an interesting question: if the concrete base is an effective ground 
connection, do you get more value by placing the rods a rod length away from 
the base?


Yes..
just on a superposition of currents basis, you'd say this, without getting into non-linear effects.

The real question would be "how far"

If you think about the current flowing from a rod or block of concrete or metal plate.. close up, it's sort of uniform, but in the "far field" (to borrow an antenna term) it's spherical.

Rods are usually modeled as a line source: a cylinder with a hemisphere on the bottom.

A plate (or a cube) would be a bit different. Maybe you could model it as a hemisphere

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>