The attachment is an adapter that is hex on one end (goes in drill's
chuck) and is a socket style drive on the other end, preferably at least
a 3/8 inch drive. You select a socket of that drive size that fits the
hex nut on the winch. You may have to jam two nuts together to get the
assembly to take the torque without slippage.
Stand by for the real deal from those much more qualified than I.
Patrick NJ5G
On 5/8/2016 4:21 PM, w5jmw@towerfarm.net wrote:
Hello to all.Sometime back I saw a post about a attachment to a 1/2
horse drill to raise a tower.I have a us tower hdx-455.It used a
fulton 1550 winch I think,if memory is working.Is there a attachment
available?Thanks in advance...john w5jmw
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|