This weekend our club is operating a special event. I thought I was fine
tuning a CFG file that would do everything, but now I ended up with
multiplier lists that don't dim after working domestic contacts and only dim
sometimes when working DX.
I have two computers networked (one CW, one phone). I want to log RST NAME
and QTH. I would also like to have a multiplier list showing domestic and DX
mults that works. Below, please find my current CFG file data. Anyone have a
solution? Thanks.
73 de Mike, N9BOR
FISTS MAC SMC ZUT
http://www.qsl.net/n9bor
MAC http://www.qsl.net/mac
di dah dit - The only Roger Beep you'll ever need.
Let your fingers do the talking -- Morse code.
My designated driver is a 12BY7A.
Over 1 million beeps served!
MY CALL = K9Y
CONTEST = GENERAL QSO
DISPLAY MODE = COLOR
KEYER RADIO ONE OUTPUT PORT = PARALLEL 1
PADDLE PORT = 1
MULTI PORT = SERIAL 2
COMPUTER ID = D
;This sets up the type of DX Multiplier you will use
DX MULTIPLIER = ARRL DXCC
;This sets up the domestic multiplier used. By asking
;for a second multiplier you automatically enable ALT-G
;to swap between the two displays;
DOMESTIC MULTIPLIER = DOMESTIC FILE
;This file is for 50 states and 13 provinces.
DOMESTIC FILENAME = S50P13.DOM
;other stuff reduced to just the last instance of each
ALL CW MESSAGES CHAINABLE = TRUE
AUTO DUPE ENABLE S AND P = FALSE
BAND MAP ALL BANDS = FALSE
BAND MAP ENABLE = FALSE
;BIG REMAINING LIST = TRUE
CALL WINDOW SHOW ALL SPOTS = FALSE
COUNTRY INFORMATION FILE = CTY.DAT
CQ EXCHANGE = ^^ $ RST 5NN QTH NILES, IL BK
CQ EXCHANGE NAME KNOWN = ^^$ RST 5NN QTH NILES, IL BK
CQ MEMORY F1 = CQ CQ PISAN TOWER SPEC EVENT DE \ \ K
CQ MEMORY F2 = CQ PISAN TOWER^ CQ PISAN TOWER^ CQ PISAN TOWER DE \ \ K
CQ MEMORY F3 = RST 5NN QTH NILES, IL
CQ MEMORY F4 = 73 \ QRZ
CQ MEMORY F5 = K9Y
CQ MEMORY F6 = DE \
CQ MEMORY F7 = SRI QSO B4 73 \ QRZ
QSL MESSAGE = 73 \ QRZ
REPEAT S&P EXCHANGE = RST 5NN QTH NILES, IL
S&P EXCHANGE = RST 5NN QTH NILES, IL
CURTIS KEYER MODE = A
DISTANCE MODE = MILES
FARNSWORTH ENABLE = TRUE
FARNSWORTH SPEED = 28
FLOPPY FILE SAVE FREQUENCY = 50
FLOPPY FILE SAVE NAME = a:\pisancw.bak
HOUR OFFSET = 5
INITIAL EXCHANGE = NAME QTH
LEADING ZERO CHARACTER = 0
LEADING ZEROS = 1
;MOUSE ENABLE = TRUE
MULTI RETRY TIME = 15
MY GRID = EN62
PADDLE MONITOR TONE = 650
PARTIAL CALL LOAD LOG ENABLE = FALSE
PTT TURN ON DELAY = 25
SAY HI ENABLE = TRUE
SAY HI RATE CUTOFF = 50
SCP MINIMUM LETTERS = 3
SEND COMPLETE FOUR LETTER CALL = TRUE
SEND QSO IMMEDIATELY = FALSE
TUNE WITH DITS = TRUE
;USER INFO SHOWN = QTH
VISIBLE DUPESHEET = FALSE
WARC BAND ENABLE = FALSE
WEIGHT = 1.00
|