In talking directly with N2IC:
>>>>Grrrrr. It's been so long since I used this 950, I seem to have
>>>>forgotten it will have behaved this way all along - as well as
>>>>others having to put up with, though maybe it's more pronounced
>>>>on one model than others. Or maybe it's not so noticeable if
>>>>one has something like a pair of 850s & they both do it? Or is
>>>>the 950 (not 950SDX) worse? After having just had a chance to
>>>>use an MP again, I find the 950 to be really annoying.
>>>
>>>This never seemed like an issue with my 950SDX. I just measured the
>>>delay between the time I stopped turning the dial, and TR updating the
>>>frequency. With 6.69 (my version-of-choice), it's never more than 1
>>>second. With 6.79 it seems even faster.
>>
>>KENWOOD RESPONSE TIME?
>
>It's set to the default - 25 ms on 6.69, 100 ms on 6.79.
>
>>Does it behave the same after extended periods of tuning around?
>
>Yes - seems fine no matter how long I spin the dial. It even updates
>occassionally while I'm tuning. Sounds like the SDX processor is handling
>the interrupts from the serial port a little better than the 950.
73, VR2BrettGraham
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|