WriteLog
[Top] [All Lists]

[WriteLog] W5XD multi-keyer operation

To: <writelog@contesting.com>
Subject: [WriteLog] W5XD multi-keyer operation
From: w5xd@writelog.com (W. Wright, W5XD)
Date: Sat, 3 Aug 2002 16:11:17 -0000
This is correct. And I can add another simplifying hint:
if you use a mono cable for the CW as opposed to the stereo,
then there is no RING connection--the mono connector in
the keyer's stereo jack will connect the RING to ground,
and the circuit is complete.

You would only need to go to a stereo connector if you
have a problem with ground isolation and want to take
advantage of the opto-isolated keyer outputs, or if
you rig requires keying of a negative voltage (which only
some of us are old enough to remember).

Wayne

> -----Original Message-----
> From: writelog-admin@contesting.com
> [mailto:writelog-admin@contesting.com]On Behalf Of Dave
> Sent: Saturday, August 03, 2002 10:14
> To: n9qqk@urbancom.net; writelog@contesting.com
> Subject: Re: [WriteLog] W5XD multi-keyer operation
> 
> 
> Ron
> First make sure you are keying between the TIP and Ring 
> connections (not 
> the TIP to GROUND). The keying line is set up so that you can 
> reverse the 
> keying for negative or positive keying.  I think ( but don't 
> remember for 
> sure) that the RING goes to Ground and the TIP goes to the 
> key line. Try it 
> that way first  and if it still not working then try 
> reversing the wires on 
> the Tip and Ring connections to the plug going into the keyer. If you 
> haven't already go out to he web site and download the schematics
> 
> http://www.writelog.com/cwkeyer/cables.jpg
> http://www.writelog.com/cwkeyer/CIRCUIT-1.jpg
> http://www.writelog.com/cwkeyer/CIRCUIT-2.jpg
> 
> all this will be much clearer.
> 
> You do not need any external transistors if you are keying 
> via the CW out 
> jack. You will need external transistors if you are keying 
> via the parallel 
> DB-25 outputs.
> 
> Dave
> 
> At 01:06 AM 8/3/02 -0500, n9qqk@urbancom.net wrote:
> >I just received the keyer, and am attempting to
> >get it functional.
> >
> >Rig control and headset audio switching seem to
> >be working fine, but I'm having a problem with
> >the serial CW keying.
> >
> >I hear the sidetone audio, so the keyer is
> >generating code.
> >The rig (FT1000D) goes into transmit just long
> >enuf to send the code, so the PTT signal is
> >getting to the radio.
> >However, no code is being output.
> >
> >The CW out jack is connected to the rig's KEY
> >jack via s stereo audio cable.  Do I need the
> >transistor keying circuit I see described in the
> >writelog doc?  I thought that it would be
> >included in the keyer itself.
> >
> >Any help would be appreciated.
> >
> >Ron - N9QQK
> >
> >_______________________________________________
> >WriteLog mailing list
> >WriteLog@contesting.com
> >http://lists.contesting.com/mailman/listinfo/writelog
> 
> Dave
> NR1DX
> nr1dx@arrl.net
> 
> "A man who picks a cat up by the tail learns a lesson he can 
> learn no other 
> way" .... Mark Twain
> 
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> 

<Prev in Thread] Current Thread [Next in Thread>