WriteLog
[Top] [All Lists]

[WriteLog] ALT K window does not display characters

To: <writelog@contesting.com>
Subject: [WriteLog] ALT K window does not display characters
From: doncassel@compuserve.com (Don Cassel)
Date: Tue, 5 Nov 2002 09:06:27 -0500
Alt-K works okay for me on W98 with either serial or parallel port keying on
several different computers including desktops and laptops. It always has up
to the current release.

Don VE3BUC

-----Original Message-----
From: writelog-admin@contesting.com
[mailto:writelog-admin@contesting.com]On Behalf Of Gil Baron
Sent: Tuesday, November 05, 2002 8:01 AM
To: AA/WriteLog
Subject: RE: [WriteLog] ALT K window does not display characters



Why is there no reply to this problem yet? Since the program coders have not
, perhaps it is considered insignificant. Therefore, I would like anyone
else that has this problem to report it too. Just set up for CW and try the
Alt K window and see if you can read the characters that are to be sent or
if they are partially or fully hidden. If I am the only one with the problem
I suppose I will have no choice but to live with it but if others report it
too perhaps they will consider fixing it, or at least acknowledging my
defect report!
I made another test, using RTTY window on one of the machines I get a 2 line
window for Alt K. The other machine gets only one line, even on RTTY and
even though I uninstalled and reinstalled 10.35g. This does show the
character but it is still a defect as why would it use a 2 line window yet
when the entry gets to the end of the line it does not wrap to the next line
but rather just keeps on going as though it were one line. I think it needs
to be one line but show the entire character. Nevertheless, I could live
with this if it would work on CW.



> -----Original Message-----
> From: writelog-admin@contesting.com
> [mailto:writelog-admin@contesting.com]On Behalf Of Gil Baron
> Sent: Sunday, November 03, 2002 7:35 AM
> To: AA/WriteLog
> Subject: [WriteLog] ALT K window does not display characters
>
>
> When I use Alt-K to transmit CW the characters are not displayed.
> All I see
> is a Square cursor. The problem is that the window height (which is not
> sizable WHY?) does is not high enough so the actual characters are lost
> either above or below the visible window. This has been that way
> ever since
> early releases. Is there a fix or a way to adjust this in the ini file
> because CW keying that way is not very easy.
> All of the other windows are perfect so there has to be a defect here.
>
>
> WINDOWS XP HOME
> AMD1200 with 512 Megs RAM
> Version 10.36G
> Resolution 1152x864 32 bit
>
>
> I also tried all resolutions down to 800x600 and color depth down
> to 16 bit.
> The best is 24 bit 1152x864 when I can see about 1/3 of the
> character and it
> is mostly below the window. This could be easily fixed if the window were
> set to at least 2 lines high. Well not fixed perhaps, but worked around
> since most of the time you would only send 1 line. I suspect that
> the second
> line would also be below the window.
>
>
> Please do not blame my video card or drivers as I have no problem with any
> other program. That makes it very unlikely that it is a driver or card
> problem.
>
>
> Gil Baron http://webpages.charter.net/gbaron
> 44.08333 N 92.51263 W 1055'
> "Hierro candente, batir de repente"
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
>


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog



<Prev in Thread] Current Thread [Next in Thread>