WriteLog
[Top] [All Lists]

[WriteLog] Help troubleshoot rig reading

To: <Writelog@contesting.com>
Subject: [WriteLog] Help troubleshoot rig reading
From: "WA9ALS - John" <wa9als@starband.net>
Date: Sat, 13 Sep 2003 12:16:13 -0500
List-post: <mailto:writelog@contesting.com>
I haven't changed my configuration, but I've lost the ability for WriteLog
to read my rig.  Any troubleshooting tips greatly appreciated.

Rig:  IC-756PROII on COM 5 via a CT-17 and a USB-connected Connect Tech
White Heat adapter.  I also have a modem on this adapter, and it works
fine - Thus the adapter and connection to the computer appear fine.  It has
also worked previously for a couple of years.  I also use a PW-1 connected
via the same CT-17, and the amp tracks the rig exactly as it should.  This
generally clears the CT-17 as a site of malfunction.

On WL's Port setup, the rig is on com 5, Baud is 9600, and POLL is checked.
Again, this used to work, and I haven't changed anything.

The baud rate and hex address of the rig are correct (9600, 5Chex) and have
not changed, and again, this has all worked for a long time.

I have no idea why we're not talking anymore, but would appreciate any ideas
how to troubleshoot it.  I do have another interface that I can try between
the White Heat adapter and a 706MKIIG - It's in the car right now, but I
plan on bringing it in and using it as a further check this afternoon.  If
WL won't read it either, the problem has to be in the CT-17 or the White
Heat.  It's probably something simple like a loose wire etc, but I can't
find it, and again, the modem works fine through the USB serial adapter, so
that seems to be working!  Thanks


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>