Jim,
The column selection button is to only to select the CW port.
To define the radio control, you have to select the proper radio in the Com 4
row.
In mine, I'm using Com 3 and I have attached an image of the port set up window
so you can see what it's supposed to look like.
73,
Bob N5NJ
> ------------Original Message------------
> From: "VE3XD" <ve3xd@rogers.com>
> To: "'Jim Dunbar'" <jdunbar28@mchsi.com>, writelog@contesting.com
> Date: Thu, Jul-29-2004 8:53 PM
> Subject: RE: [WriteLog] Write Log Rig Control
>
> Jim,
>
> You should be able to select both. Even though these are option buttons
> they
> act like check boxes. That is, they are not mutually exclusive. You
> don't
> really need an extra column but it might be less confusing if the
> options
> were check boxes that are normally used when more than one choice is
> possible. If you can't check both, one for cw and one for rig control
> then
> something else is wrong.
>
> Don VE3XD
>
> > -----Original Message-----
> > From: writelog-bounces@contesting.com
> > [mailto:writelog-bounces@contesting.com] On Behalf Of Jim Dunbar
> > Sent: Thursday, July 29, 2004 9:47 PM
> > To: writelog@contesting.com
> > Subject: [WriteLog] Write Log Rig Control
> >
> > Hello,
> >
> >
> >
> > I have the latest Write Log and I am using Windows 2000 with
> > my Dell Latitude Laptop.
> >
> >
> >
> > I use LPT1 to generate CW and this works very well with QSK
> > when using Full-Break-In on my FT-1000D.
> >
> >
> >
> > I also have a USB to Serial converter box from MIcroham.
> >
> >
> >
> > This box allows me a virtual port COM 4. The output of this
> > converter box has a 6 pin din connector that connects to the
> > FT-1000D CAT jack for Rig control
> >
> >
> >
> > This virtual COM 4 port works very well also for controlling
> > my FT-1000D Rig frequencies with Writelog.
> >
> >
> >
> > HOWEVER, The problem is that I cannot select LPT 1 for CW and
> > COM 4 for Rig Control at the same time.
> >
> >
> >
> > There is only one COLUMN under the Ports Setup Page for
> > selecting COM 4 or LPT 1.
> >
> >
> >
> > I would like to see another column of entries, so that both
> > LPT 1 for CW and COM 4 for RIG Control can be set at the same time.
> >
> >
> >
> > So, right now I can only select LPT 1 or COM 4 and not both.
> >
> >
> >
> > Thanks,
> >
> >
> >
> > Jim
> >
> > K4PV
> >
> >
> >
> > _______________________________________________
> > WriteLog mailing list
> > WriteLog@contesting.com
> > http://lists.contesting.com/mailman/listinfo/writelog
> > WriteLog on the web: http://www.writelog.com/
> >
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
>
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|