My guess is that the 751A takes a button push that cannot be activated with
a command. You have to push the split button.
73
Jim W7RY
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] On Behalf Of JerryBliss - k6iii
Sent: Monday, October 30, 2006 8:10 PM
To: writelog@contesting.com
Subject: [WriteLog] WL - strange split ops on 40m observed
While operating CQWW/ssb this weekend, I noted a strange behavior on
40m that I had not seen before.
> I would click on the band map and the transciever would go to the
> frequency of the spot (low down on 40m) and then a second later shift
> up to the high part of the band (somewhere in the US Phone band). I
> didn't observe if it shifted to the same frequency each time or
> observe any pattern.
>
> Rig is old IC-751a with piexx interface.
> Connected to spotting net using the VE7CC s/w.
> Running a recent version of WL (10.60g).
I suspect something strange set up in the WL ini file or perhaps the WL
s/w driver for these old ICOM rigs is misbehaving. Any suggestions?
Jerry/k6iii
San Jose, CA
----------------------------------------------------
WB6JJJ wrote...
Jerry,
I wonder if the 751 will receive "split" information from WriteLog??
I was able to click on a call in the packet window and the radio
(756ProIII) would go to the proper frequencies with split activated -
on 40 meters. If the station was not split - then split was
automatically turned off on the radio... This allowed me to call a
station quickly as my transmit frequency was already loaded - very
cool...
Bill Maurer WB6JJJ
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|