> Remember what I said in that last email, once you've loaded
> the "MMTTY for Writelog from SM6SRW" (this is just the "shim"),
> NOT to be confused with MMTTY itself, all control for PTT and
> FSK relies on the settings within RTTYRite. That's the reason
> that the PTT in the MMTTY control panel no longer works.
After a little experimentation, what really happens is that
"Software generated FSK" is RTTYrite's cue to bypass MMTTY
on transmission. When using the "Software generated FSK"
settings the MMTTY plug-in is used only for receive!
73,
... Joe, W4TV
> -----Original Message-----
> From: writelog-bounces@contesting.com
> [mailto:writelog-bounces@contesting.com] On Behalf Of Charles Morrison
> Sent: Monday, March 03, 2008 7:04 PM
> To: writelog@contesting.com
> Cc: lists@microham-usa.com; 'Don Hill AA5AU'; 'Rick Lindquist'
> Subject: Re: [WriteLog] Using MMTTY with WriteLog
>
>
> > Date: Mon, 3 Mar 2008 18:39:18 -0500
> > From: "Rick Lindquist" <n1rl@earthlink.net>
> > Subject: Re: [WriteLog] Using MMTTY with WriteLog
> > To: "'Joe Subich, W4TV'" <lists@microham-usa.com>, "'Don
> Hill AA5AU'"
> > <aa5au@bellsouth.net>, <writelog@contesting.com>
> > Cc: jcarcia@arrl.org, 'Charles Morrison' <cfmorris@bellsouth.net>
> >
> > Greetings!
> >
> > Success at last! Hallelujah!
> >
> > One other thing I needed to do was make some changes to the
> jumpers on my
> > RIGblaster Plus. The jumper pattern I wound up with is NOT
> one that West
> > Mountain Radio suggests in the manual, so it was helpful to
> know that I
> > wanted the PTT on RTS (already knew that keying was on
> TXD). Curiously,
> with
> > these settings I can no longer do "Sound Board FSK" with RittyRite,
> although
> > I might be overlooking something there.
> >
> > One thing that may have been leading me astray as I tried various
> > configurations is that clicking the TX button on the MMTTY
> plug-in window
> > does NOT put the transceiver into transmit as it does with the MMTTY
> > standalone program. I had to hit one of the F keys to play
> back a stored
> > message in order to trip the PTT and send data. This is
> something worth
> > pointing out to others, I believe.
>
> Remember what I said in that last email, once you've loaded
> the "MMTTY for
> Writelog from SM6SRW" (this is just the "shim"), NOT to be
> confused with
> MMTTY itself, all control for PTT and FSK relies on the
> settings within
> RTTYRite. That's the reason that the PTT in the MMTTY
> control panel no
> longer works. Think of it this way, if the PTT port setting
> in MMTTY would
> actually be active, it would immediately conflict with the
> PTT port selected
> in RTTYRite. The software generated FSK corrects the problem
> with some USB
> converters.. remember the Belkin FD103whateveritis doesn't
> require this..
> only the ones that don't support the 5bit codes.
>
> I too was unable to get Software FSK to work (just to test
> with Rick) while
> using the Microkeyer. However it's a nonissue, since
> directly selecting the
> port has always worked just fine. I guess probably because
> of the fact that
> the Microkeyer is much more then a USB-Serial converter.
>
> Charlie
> KI5XP
>
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|