Hi
I do use a Kenwood TS-2000.
I didn?t used any direct entering into writelog, I just use SPLIT button on
the radio and then start working.
During CQ WW CW I used XIT instead, but if I working split in CW/RTTY and
the log closed down 20 times :(
This bug is very irritating during pileups...
73s LA6FJA Rag
-----Opprinnelig melding-----
Fra: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com] På vegne av Gary AL9A
Sendt: 24. november 2010 19:27
Til: 'WriteLog Reflector'
Emne: Re: [WriteLog] WLOG shuts down with use of split
Rag,
What is the radio that you are "direct entering" the split? If it is an
Icom product the Help manual for the [Rigs] section of writelog.ini says the
following:
"Setting this entry to 1 causes the WriteLog Icom driver to send a split
on/off command to the rig every time it polls the rig for its frequency.
This means that WriteLog is sure to know whether the rig is set for split.
IcomForceSplit=1
Setting this option to 2 causes WriteLog to do the same as setting to 1,
but, in addition, If you tune the rig from its front panel more than 500Hz
after WriteLog has set it to split, then WriteLog automatically turns the
split off.
IcomForceSplit=2
Note: WriteLog versions 10.30 and older behave like option (2) above for all
non-zero settings of this option."
This is how WL knows whether the rig is set for split. If you set split by
"direct entry" on the radio, WL has no way of knowing the spilt condition
and will turn it off on subsequent polling. If you have IcomForceSplit=2
set in the ini file then when you try to tune where you are listening WL
will turn the split off if you tune more than 500 Hz. The best solution is
to set and clear split via WL with the "-" key rather than "direct entry" by
hitting the Split button on the radio.
73,
Gary AL9A
----- Original Message -----
From: "Brobakken, Stein Roar" <s-roabr@online.no>
To: "'WriteLog Reflector'" <writelog@contesting.com>
Sent: November 24, 2010 7:39 AM
Subject: [WriteLog] WLOG shuts down with use of split
> Hi
>
> I have a problem, if I use a split operation on the rig, "directly
> entered",
> without setting any further SPLIT in writelog.
> Any time if I push the XFC/TF button on my rig, it can work 1 to 20 times,
> suddenly writelog shuts down.
> This is annoying if you are middle of a RTTY pileup or DX pile... or even
> worse if you use this log on a dxpedition.
>
>
> I do run latest version, and this have been for a loooong time in previous
> versions too.
> Same in windows xp pro and windows 7....
>
> 73s Rag LA6FJA
>
> _______________________________________________
> WriteLog mailing list
> WriteLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/writelog
> WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|