WriteLog
[Top] [All Lists]

Re: [WriteLog] [FCG] SOR2 keying focus with WriteLog

To: n3rd@arrl.net, writelog@CONTESTING.COM
Subject: Re: [WriteLog] [FCG] SOR2 keying focus with WriteLog
From: Georgek5kg@aol.com
Date: Sat, 12 Nov 2011 15:03:37 -0500 (EST)
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Dave and any WL users,
 
We are back to troubleshooting the SO2R cw keying focus problem.   To 
restate the problem, the cw keying focus on the DX Doubler does not  
automatically switch from Radio L to Radio R.  The logging program is  
WriteLog, ver 
10.87e.  The DX Doubler will switch cw keying focus manually  just fine.
 
We have confirmed that there is a constant +4.5 vdc on pin 14 of the LPT  
connector.  It does not go to 0.0 vdc when switching from Radio L to Radio  R 
in WriteLog.  For some reason, WriteLog is not causing the +4.5 vdc  on LPT 
pin 14 to toggle.
 
Any ideas will be appreciated.
 
Tnx, George 
 
George  Wagner, K5KG
Sarasota, FL 
941-400-1960 cell  

 
In a message dated 11/7/2011 5:15:15 A.M. Eastern Standard Time,  
dave.n3rd@verizon.net writes:

Hi  George,


The most basic  response of the DXD is to have the red LEDs transfer from 
Radio 1 to Radio 2  and back when you switch transmit focus.  The DXD looks 
for a toggling  TTL-level line on its input connector J9, Pin 14, from the  
manual:





My first  recommendation is to have you put a meter on Pin 14, and then 
change radios on  the computer.  You should see the level go up and down, and 
actually hear  relays click in the DXD.  If you can test that, and let me 
know, we can  go to the next step of debugging.


73 -  Dave


 
____________________________________
 

On 6 Nov 2011  at 21:01, Georgek5kg@aol.com wrote:




Hi  Dave,
I  checked the jumpers, and they are set according the instructions in the 
DXB  manual.
The red  LEDs only switch when I switch them manually. I could not get them 
to switch  automatically regardless of what I did with WriteLog
I spent  the better part of Saturday troubleshooting this problem, but in 
the end just  gave up. By 4pm, I had to reconfig the radios and antennas for 
SO1R. I also  then went back to WinTest as my logger, as I prefer that over  
WriteLog.
I'd like  to find the solution to the automatic cw focus problem so I can 
go SO2R with  the DXB. Are you available to assist me?
Tnx,  Geo... 
George  Wagner, K5KG
941-400-1960 cell 
In a  message dated 11/5/2011 5:50:22 P.M. Eastern Standard Time,  
dave.n3rd@verizon.net writes:


George,


Are the internal jumpers set properly  for WL?


If the red LEDs are changing, then  the CW and PTT signals should be being 
switched between the two  radios.


Dave


 
____________________________________
 

On 5 Nov 2011 at 12:40,  Georgek5kg@aol.com wrote:




Dave,
Any suggestions about the problem I  have cited below?
Tnx, George
George Wagner, K5KG
941-400-1960  cell


 
____________________________________
 From:  Georgek5kg@aol.com
To: writelog@CONTESTING.COM
Sent: 11/5/2011 12:21:49  P.M. Eastern Daylight Time
Subj: Fwd: [FCG] SOR2 keying  focus
George Wagner, K5KG
941-400-1960  cell


 
____________________________________
 From:  Georgek5kg@aol.com
To: support@writelog.com
CC: fcg@kkn.net
Sent:  11/5/2011 12:20:42 P.M. Eastern Daylight Time
Subj: [FCG] SOR2 keying  focus
Hello all...any help with this  will be appreciated.

I have set up WriteLog (10.87E) for SO2R using a  Top Ten DX Doubler. I
have all of the functions are working except the  automatic switching of CW
keying from Radio 1 to Radio 2 does not work. I  can manually switch the CW
keying between R1 and R2, ok, but not  automatically.

Is there a menu function in WriteLog that I must  set?

73, George

George Wagner, K5KG
941-400-1960  cell
_______________________________________________
FCG mailing  list
Send mail - FCG@kkn.net
Change/edit subscription info -  http://www.kkn.net/mailman/listinfo/fcg
FCG Web site -  www.floridacontestgroup.org
Facebook -  http://tinyurl.com/4xw5jr7
DXCluster - telnet to  k4fcg.dyndns.org


The following section of this  message contains a file attachment
prepared for transmission using the  Internet MIME message format.
If you are using Pegasus Mail, or any other  MIME-compliant system,
you should be able to save it or view it from within  your mailer.
If you cannot, please ask your system administrator for  assistance.

---- File information -----------
File:  hts_1.PNG
Date:  7 Nov  2011, 5:15
Size:  54036 bytes.
Type:   Unknown


_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>