WriteLog
[Top] [All Lists]

Re: [WriteLog] Registration code

To: "'LB3RE LJ3RE Stein-Roar Brobakken'" <post@lb3re.com>
Subject: Re: [WriteLog] Registration code
From: "ALAN ZACK" <k7acz@cox.net>
Reply-to: k7acz@cox.net
Date: Mon, 23 Jun 2014 14:14:46 -0700
List-post: <writelog@contesting.com">mailto:writelog@contesting.com>
Yes, I do believe WIN 8.1 is the cause of this problem. But I am not familiar 
enough with WIN 8.0 or 8.1 to figure out how to find this.

I can find the WRITELOG Folder OK and see all the files in it but don't know 
what to look for as far as the registration code. 

The old PC I mentioned that I can still access WRITELOG on uses WIN 7.

I have the original registration code on the email order confirmation but it 
has expired and no longer works.

If I start all over on the new PC running WIN 8.1 will the new install find my 
previous contest logs and save them? WRITELOG did work FB on this new PC as it 
came with WIN 8.0. Then I was told I should allow the PC to upgrade to 8.1 for 
better security. (Every time I turned it on it would ask if I wanted to update 
to 8.1). Since updating from WIN 8.0 to 8.1 I can no longer open WRITELOG.

It is only fair I pay for a new subscription. I just hope not to lose my 
contest files from my original subscription.

-----Original Message-----
From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of LB3RE 
LJ3RE Stein-Roar Brobakken
Sent: Saturday, June 21, 2014 7:06 PM
To: k7acz@cox.net
Cc: 'Dean St. Hill'; 'Writelog Reflector'; 'Steve Woodruff'
Subject: Re: [WriteLog] Registration code

I run Writelog on win 8/8.1 1. Be sure to show hidden folder in Win8/8.1 2. 
Find virtual store/ local folder ( depends which windows you running ...PRO 
gives full paths just as win XP) 3. Create or find your Writelog      I will 
see if i can make a guide how i made my smooth setup ;)   

---Sent by iphoneLB3RE LJ3RE K3RAG ex: LA6FJAwww.lb3re.com ~ Rag ~ Stein Roar 
Brobakken e-mail:post@lb3re.comhttp://la5o.wordpress.comwww.contesting.no

Thanks for the info.



When trying a brand new installation I got to the box where it asks for my
call sign and registration code. On entering my registration code it tells
me it is invalid or expired so I will order the program and start as a new
user. I just hope the WRITELOG files I already have on the PC won't mess up
the new installation and that my prior contest files will be saved.  


I purchased the program in Feb 2013 so it has been a year and has expired.
However, I thought you could still open and use the program but could not do
updates without a new subscription. But it will not attempt to open; it just
tells me I have a bad registration code.

What I find strange is I pulled my old PC that I no longer use out of the
garage on which I first installed WRITELOG on. When I click on the WRITELOG
shortcut the program opens FB and shows ver 11.14B Sept 2013. There are no
contest files in the program because I never used that PC in a contest. But

I find it strange that the program will open normally and I would guess
would work using ver 11.14B if I wanted to use it that way. But I will get a
new install for the current contest PC.



-----Original Message-----

From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of Dean

St. Hill
Sent: Tuesday, June 17, 2014 12:35 PM
To: k7acz@cox.net
Cc: Writelog Reflector; Steve Woodruff
Subject: Re: [WriteLog] Registration code

Alan

The version you purchased and updates for a year should work just fine so I
think the issue is to simply re-install the version you bought. You should
have an email which came with the necessary instructions and links.

I do not use Windows 8 myself and having just upgraded my shack computer
from Win XP pro, I will probably skip Win8 altogether unless I end up buying
another PC - so I am not familiar with the various defaults in terms of
directories.

I suspect the reason Writelog is not running and referring to an invalid
code is because its looking in a directory and not finding your valid code
- which is no doubt on the computer just not "visible" to writelog.

Try a clean install and see if that works.

Regards,

Dean - 8P6SH

On Tue, Jun 17, 2014 at 3:04 PM, ALAN ZACK <k7acz@cox.net> wrote:
> I purchased version FULL V11.09 of WRITELOG on 2/21/2013. I have been 
> successfully using WriteLog on this PC since then downloading the 
> latest updates before each contest. It is installed on a PC that came 
> with Windows 8.0. Since last using WriteLog I updated to Win 8.1 if 
> that might make any difference. Since changing from WIN 8.0 to 8.1 it 
> has quit working.
> When I try to open WRITELOG on my contesting computer I get a message:
> Invalid registration code. See wtitelog.com.

> My last use was the CQ WPX SSB Contest on March 29/30, 2014. The 
> heading of the Cabrillo contest log I submitted shows my logger as

WRITELOG 11.19D.

> Since I am unable to run WriteLog I can't download any newer versions 
> or updates. If there is a newer version available I am willing to 
> purchase it.

> I went to my WRITELOG program folder and opened the HELP files by 
> clicking on the HELP icon. But I was unable to find any help topics 
> concerning registration codes.

> I sent this same email to 'support@writelog.com' on June 10 but no  
> reply as yet so I am seeking help from the reflector.

> Tnx & 73

> Alan, K7ACZ

 


> -----Original Message-----

> From: WriteLog [mailto:writelog-bounces@contesting.com] On Behalf Of  
> Steve Woodruff

> Sent: Wednesday, March 12, 2014 5:44 PM

> To: Writelog Reflector

> Subject: [WriteLog] WriteLog 11.19 Released

>

>

>

> Hi Folks,

>

>

>

> WriteLog version 11.19 is a free upgrade for anyone who has purchased  
> the full version of WriteLog since Feb 2013.

>

> This excludes the "Newbie" version, which does not include any free  
> upgrades.  If you are running an earlier version, go here to purchase  
> a new registration code:

>

>  <http://writelog.com/ordering> http://writelog.com/ordering

>

>

>

> WriteLog 11.19 includes the following new features/fixes:

>

>

>

> * Add KS QSO Party Support

>

> * Enable hardware flow control for Ten Tec Omni.  Add

>

>   restrict VFO strings @A and @B.

>

>

>

> The latest software can be downloaded here:

>

>  <http://writelog.com/downloads/writelog-versions>

> http://writelog.com/downloads/writelog-versions

>

>

>

> Thanks,

>

>

>

> Steve N9OH & Wayne W5XD

>

>

>




_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web:  http://www.writelog.com/

<Prev in Thread] Current Thread [Next in Thread>